钻机产品

气动水井钻机

HW-220L气动钻机

HQZ系列水井钻机是一种轻型、高效、多功能的钻凿孔设备，它主要适用于工、民钻井、地温钻井，具有结构紧凑、进尺快，移动灵活适用地域广等优点。尤其适用与山区和岩石地层取水...

【手机号码】：13563796182
【公司邮箱】：hwjt@hengwanggk.com
【厂区地址】：山东省济宁市任城区金宇西路4号海能电商产业园C座24楼
【总部地址】：山东省济宁市太白湖新区

产品详情

HQZ系列水井钻机是一种轻型、高效、多功能的钻凿孔设备，它主要适用于工、民钻井、地温钻井，具有结构紧凑、进尺快，移动灵活适用地域广等优点。尤其适用与山区和岩石地层取水。

HQZ series water well drilling rig is a lightweight, efficient andmultifunctional drilling equipment, it is mainly applicable to industrial and civil drilling, geothermal drilling, has the advantages of compact structure, fast advancing, mobile and flexible wide application region etc.. It is especially suitable for water intake in mountainous and rocky strata.

该钻机可在不同地层上进行穿凿工作，钻孔直径可达245-294mm。该钻机采用新型液压技术，配套大扭矩液压马达回转以及大缸径液压油缸推进，名厂多缸发动机为液压系统提供动力，两级空滤以及空压机进气设计，延长柴油机的使用寿命。独特的泵组设计方便维修，降低维修成本。集中控制的液压操纵台，方便操作。

The rig can create drilling jobs in different strata, borehole diameter can up to 245-294mm. The rig with hydraulic technology, supporting high torque hydraulic motor rotation and large bore hydraulic cylinder push, the multi cylinder engine of famous factory provides power for the hydraulic system, two stage air filter, air compressor air intake design, prolong the service life of diesel engine. Special pump set design is convenient for maintenance and reduce the cost of maintenance. Centralized control of the hydraulic control table, convenient operation.

该系列钻机采用挖掘机履带底盘，越野性能强。独立的模块设计，可使钻机装在卡车上，增加其机动性。两档回转和推进速度可满足在土层和岩层的不同穿凿需要。组合式的定位器，可根据不同型号的钻杆和冲击器进行调整更换定位盘，保证定位定心准确、可靠。卷扬机构方便钻杆和冲击器的吊装，降低劳动强度。

The series of drill rig adopts a excavator crawler chassis and has strong off-road performance. The independent module design allows the drill to be mounted on the truck to increase its mobility. Two speeds of rotating and advancing speed can meet the different needs of soil and rock drilling. Combined positioner, the positioning disc can be adjusted and replaced according to different types of drill pipe and impactor, so as to ensure the accuracy and reliability of the positioning and centering. The hoisting mechanism is convenient for hoisting of drill pipe and impactor, so as to reduce the labor intensity.

本机可适用各种地层，用于水井工程，地热井，锚杆桩孔等，并可使用跟管钻具。具有整机液压控制，自动装卸钻杆，履带式底盘，大马力柴油机，四角液压平衡，地形适用能力更强等优点。
This machine can be applied to various strata, used in water well engineering, geothermal well, anchor pile hole and so on, and can be used with follow-pipe drilling. It has the advantages of whole machine hydraulic control, automatic loading and unloading drill pipe, crawler type chassis, large horsepower diesel engine, four hydraulic support leg balance, stronger terrain application ability and so on.

技术参数：
Technical Parameters:

型号Model		HQZ150L		HQZ180L
整机重量（T )Overall weight		3.5		4.2
外形尺寸(mm )Dimension		340015002400		380017002350
钻孔直径（mm )Drilling diameter		130-245		130-294
钻孔深度（m)Drilling depth		150		180
一次推进长度（mm )One-time advance length of the drill(mm)		3000		3000
行走速度（km/h )Traveling speed		2.5		2.5
单机爬坡能力（max )Climbing ability		25		30
最小离地间隙（mm）Minimum Ground Clearance		250		250
工作气压（mpa )Working Air Pressure		1.45 - 2.5		1.7-2.5
耗气量I Pl3Zrain)Air consumption		15 - 27		15-27
主机功率（kw)Main machine power		42/云内 Yunnei		60/云内 Yunnei
回转(rpm) Rotary Speed		38 - 80		48 - 70
回转扭矩（Nm )Rotary torque		4000-5000		4200-5600
型号	HQZ150L		HQZ180L
整机重量（T )	3.5		4.2
外形尺寸(mm )	340015002400		380017002350
钻孔直径（mm )	130-245		130-294
钻孔深度（m)	150		180
一次推进长度（mm )	3000		3000
行走速度（km/h )	2.5		2.5
单机爬坡能力（max )	25		30
最小离地间隙（mm）	250		250
工作气压（mpa )	1.45 - 2.5		1.7-2.5
耗气量I Pl3Zrain)	15 - 27		15-27
主机功率（kw)	42/云内		60/云内
回转(rpm)	38 - 80		48 - 70
回转扭矩（Nm )	4000-5000		4200-5600

钻机产品

最新新闻

气动水井钻机

HW-220L气动钻机

回转扭矩（Nm )Rotary torque

产品中心

扫这里加微信